A holographic projection helps deal with any cameras that might be looking at the subject, while a simple perception filter helps fill in the finer details for anybody who is looking at them.
Inspired during her work reverse-engineering a T.O.P. Suit, Ware has realized the ability to hide what she's wearing while she's wearing it is even better than the ability to quickly make it disappear.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Exo-Skeleton and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Apparel. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results.
While the Shock Suit usually tends to be a bulky set of armoring, through the power of magnetic plating and warping the electromagnetic spectrum via magnetispectral threading, The Sparkman can now return to being a somewhat ordinary tax paying citizen.
Usually these clothes come as a motorcycle suit of some sort, with the shock suit's own helmet turning into a generic navy blue motorcycle helmet.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Clothing but can be collapsed into a Small Battery Bank and concealed. Collapsing or expanding it costs a Quick Action.
Spend a Quick Action to activate. This Artifact changes into one of the following Objects: Reinforced Civilian Clothes. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance must be generic, cannot mimic specific items (such as a particular painting, a certain person’s ID, etc), and must be of a similar size and weight to this Artifact.
Your Artifact makes a genuine transformation into the new Object; it is not illusory, and the Object has fully normal and expected functionality. Any functionality which the Artifact previously possessed will not be useable until the transformation is ended.
Sometimes you need to get somewhere as someone else, other times you need to very simply falsify a record or your name. Whatever it is, you can't ever go wrong with one of these little guys! Change 'em into any Polycarbonate card you see. From IDs Merchant's guild cards, all of this comes in one little package... worth a good couple dollars.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a ID Card/Driver's License and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Polycarbonate Card. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The Artifact appears to be covered in moths that quickly scatter and flap around the item. Once they settle, their wings flatten out and seem to camouflage into whatever piece of clothing the user desires.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Deer Hide Outfit and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Apparel. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The pages of the journal transform into the desired identification. A passport is the most obvious 1:1 illusion, but an official government ID and badge that flips open is also possible. Other forms of ID such as driver's license, insurance ID cards, gym memberships, etc. appear as their appropriate cards encased in a laminate sheet on each page of the journal. It is impossible to remove these IDs (as their an illusion), but this inability always seems to be an inability of the user to find the laminate seam. (If necessary there will be some modification to the laminate, allowing a magnetic strip on the ID card to be scanned.)
This Artifact can change its appearance. When not transformed, it is roughly the same size as a pocket journal and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of identification. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
People hear only what they want to hear... and see what they want to see. "Oh, are you allowed to be here? I'm gonna need to see some ID, pal." Welp, they want it... and they got it! Just show them this bad boy and you can get into a lot of places!
How's this doodad work? Uh... the power of imagination... haha. Quickly think about what you wanna show it and focus... believe in yourself! With the power of belief (and a helluvalot of moxie and confidence), you can use this to get anywhere.
How'd I make it? Uh... secret processes that would be too complicated for a layman like you to understand. Now screw off!
This Artifact can change its appearance. When not transformed, it is roughly the same size as a business card and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of identity and security cards. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The spy can do up their passport to appear as any valid form of identification.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a passport but can be collapsed into a wallet and concealed. Collapsing or expanding it costs a Quick Action.
Spend a Quick Action to activate. This Artifact changes its appearance into a chosen Object. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The spy can do up their passport to take on the appearance of any valid form of identification they may need.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a passport and just as difficult to conceal.
Exert your Mind and spend an Action to activate. This Artifact changes its appearance into an Object within the category of forms of identification. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.