When “The Firm’s Uniform” is activated, the transformation it undergoes is both subtle and imbued with an air of professional gravitas. The artifact, perhaps initially resembling a nondescript piece of legal attire or accessory, begins to shimmer with an ethereal gloss reminiscent of the polished sheen on a lawyer’s briefcase or the gleam of a well-maintained courtroom. This visual cue is brief, serving as a prelude to the transformation, much like the opening remarks in a meticulously prepared legal argument.
As the item changes, its edges blur momentarily, mimicking the effect of pages flipping rapidly through a legal tome, searching for the right precedent or statute. This transition is smooth and deliberate, echoing the precision and confidence of a seasoned attorney presenting their case. The new form materializes with the precision of a well-drafted contract, each detail snapping into place with the finality of a judge’s gavel.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Clothing and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Clothing. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results.
A series of hexagonal plates that shimmer momentarily when changing forms, allowing the car to blend into any social situation.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Car and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into a chosen Object. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), and can take on a different size, shape, and weight to the Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) or any situation which makes the size/weight disparity particularly noticeable will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
Sometimes you need to get somewhere as someone else, other times you need to very simply falsify a record or your name. Whatever it is, you can't ever go wrong with one of these little guys! Change 'em into any Polycarbonate card you see. From IDs Merchant's guild cards, all of this comes in one little package... worth a good couple dollars.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a ID Card/Driver's License and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Polycarbonate Card. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
While the Shock Suit usually tends to be a bulky set of armoring, through the power of magnetic plating and warping the electromagnetic spectrum via magnetispectral threading, The Sparkman can now return to being a somewhat ordinary tax paying citizen.
Usually these clothes come as a motorcycle suit of some sort, with the shock suit's own helmet turning into a generic navy blue motorcycle helmet.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Clothing but can be collapsed into a Small Battery Bank and concealed. Collapsing or expanding it costs a Quick Action.
Spend a Quick Action to activate. This Artifact changes into one of the following Objects: Reinforced Civilian Clothes. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance must be generic, cannot mimic specific items (such as a particular painting, a certain person’s ID, etc), and must be of a similar size and weight to this Artifact.
Your Artifact makes a genuine transformation into the new Object; it is not illusory, and the Object has fully normal and expected functionality. Any functionality which the Artifact previously possessed will not be useable until the transformation is ended.
The pages of the journal transform into the desired identification. A passport is the most obvious 1:1 illusion, but an official government ID and badge that flips open is also possible. Other forms of ID such as driver's license, insurance ID cards, gym memberships, etc. appear as their appropriate cards encased in a laminate sheet on each page of the journal. It is impossible to remove these IDs (as their an illusion), but this inability always seems to be an inability of the user to find the laminate seam. (If necessary there will be some modification to the laminate, allowing a magnetic strip on the ID card to be scanned.)
This Artifact can change its appearance. When not transformed, it is roughly the same size as a pocket journal and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of identification. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The artifact quickly flows like water from one visage to the next, changing to resemble any set of clothing the user can imagine, changing based on the will and image of the user.
The ritual for this is a tricky one. Shape changing objects are a constant in the public's mind, but by it's nature, they aren't don't have many common symbols.
This took some effort from Vel, but after several trials Vel found a ritual involving
1 Destroying several different pieced of clothing simultaneously
2 reading then burning A variety of stories of Loki, Zeus, and other gods effortly changing shape
3 A chant about stories and specifications of shape changing objects in popular media
4 Carving the an image of a chameleon into the artifact being enchanted.
Which worked as intended.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Chestplate and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Apparel. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The spy can do up their passport to take on the appearance of any valid form of identification they may need.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a passport and just as difficult to conceal.
Exert your Mind and spend an Action to activate. This Artifact changes its appearance into an Object within the category of forms of identification. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
The spy can do up their passport to appear as any valid form of identification.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a passport but can be collapsed into a wallet and concealed. Collapsing or expanding it costs a Quick Action.
Spend a Quick Action to activate. This Artifact changes its appearance into a chosen Object. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.